Codes and Standards for Telecommunication systems

    -          Fire Alarm System

·           The application shall be according to the (Fire Protection Requirements for buildings)

·           Detailed design shall follow NFPA 72 (National Fire Alarm Code) and/or the BS 5839 latest edition latest edition

·           Fire alarm shall comply with the requirement of the local branch of the general civil defense administration.

·           All Fire Alarm devices and equipment shall be UL listed.

-          Telecommunications

all applicable local building code, safety, environmental and other requirements will be met In addition to the below listed standards :

·           Requirements of the service provider

·           ISO/IEC 11801:2002 - Information technology - Generic cabling for customer premises

·           ANSI/TIA/EIA 568-B - Commercial Building Telecommunications Cabling Standard, with addendums.

·           ANSI/TIA/EIA 569-A - Commercial Building Standard for Telecommunication Pathways and Spaces

·           ANSI/TIA/EIA 598-A - Optical Fiber Cable Color Coding

·           ANSI/TIA/EIA 606 - Administration Standard for the Telecommunications Infrastructure of Commercial Buildings

·           ANSI/TIA/EIA 607 - Commercial Building Grounding and Bonding Requirements for Telecommunications

·           ANSI/TIA/EIA-TSB-67 - Transmission Performance Specifications for Field Testing of Twisted Pair Cabling System

·           EIA/TIA-526-7 “Optical Power Loss Measurements of Installed Single Mode Fiber Cable Plant

·           EIA/TIA-526-14 - Optical Power Loss Measurements of Installed Multimode Fiber Cable Plant

·           TIA/EIA-854 Full Duplex Ethernet Specification for 1000Mbps Operating Over Category 6 Balanced Twisted Pair Cabling.

·           Institute of Electrical & Electronics Engineers Sixteenth Edition

·           IEEE 802.1 - LAN/MAN Bridging and Management.

·           IEEE 802.3 - CSMA/CD Access Methods.

·           IEEE 802.11 -Wireless LAN’s.

·           Building Industry Consulting Service International (BICSI) recommendations.

·           Requirements of Civil Defense

The following codes will also be applied to IP-PBX equipment and characteristics:

·           ISO               International Organization for Standardization

·           ITU               International Telecommunication Union

-          Security Systems

Work shall be performed in accordance with applicable local building code, safety, environmental and other requirements at the commencement of installation. The following list summarizes applicable standards:

·           UL 294, UL 1076, ULC

·           CE

·           FCC – Part 15, Part 68

·           NFPA 70, NEC

·           IEEE, RS 170 variable standard

·           IEEE, NTSC (color camera broadcast)

·           PAL (color camera broadcast, Europe)

·           CCIR (monochrome standard, Europe)

·           Microsoft® Open Database Connectivity (ODBC) interface)

·           ISO Software Coding Standards for C++ and C#

·           RoHS

-          Public Address and Voice Evacuation System

·           BS 5839 Part 8: Code for Practice for the design, installation and servicing of voice alarm system

·           EN 60849: International Standards Sound System for Emergency Purposes.

·           IEC - International Electrical Commission

-        IEC 149              Sockets and Accessories for Electronic   Plug In Devices

-        IEC 268              Sound System Equipment

-        IEC 297              Dimensions of Panels and Racks

-        IEC 574              Audio-Visual, videoand Television            Equipment and System

-        IEC 60849Sound System for Emergency Purposes

·           NFPA 72: Interfacing with Fire alarm system

 

 

IP CCTV System

IP CCTV ( Closed Circuit TeleVision )System
IP based Closed Circuit Television System (IP CCTV) shall be used to allow the monitoring of defined areas inside buildings In addition to direct monitoring of video imagery by staff, software applications are available to assist the operators and help reduce operator numbers. Indoor color HD IP CCTV cameras shall be used transmit video images using TCP/IP protocols.Network Video Recorder with intrusion detection and detection analysis be used with a powerful search engine to ensure that images not only are stored for an appropriate amount of time, but events can be utilized also.

 IP CCTV system Components:
-            Network Digital Video Recorders with motion detection system 
-            Indoor and outdoor HD IP Cameras 
-            PTZ IP CCTV color camera system 
-            Color LCD (LED) Monitors Cables and wiring

IPTV System

        IPTV ( Internet Protocol Television ) system

The Internet Protocol Television ( IPTV ) system shall provide satellite and off-air

Television content, video on demand via an IP-based streaming media system over the project campus network, IPTV content shall be accessed from network computers as well as set-top boxes deployed in designated areas.

Satellite dish antennas shall be fixed and mounted in an appropriate location of the project.

IPTV (Internet Protocol Television) is a method used for distributing television signals over an IP network. The selected range of TV channels is delivered to the property from the service provider either as a satellite or digital multicast streamed signal. At this point the streamed IP channels are fed to the network core switch and from there distributed to network outlets through the property via the building LAN.

The LAN design will be scaled to manage all required number of channels and will be capable of future expansion.

As the IPTV is a networked service, IP encoded television signals can be made available at any network point, however it is normal practice to segregate IPTV onto a VLAN and dedicated outlets would be provided for IPTV system.

The IPTV server and main equipment shall be located in the server room located at the terminal building

The location of dishes is not applicable to be installed over the roof of the terminal building, an appropriate location shall be selected at the site and to be near to the terminal building for the connection with core switches.

           IPTV system Components

          The system shall consist of but not limited to:

o   IPTV client workstation

o   Digital Content Manager (DCM)

o   HD Encoders

o   SD Encoders

o   Network Management System

o   Movie storage system for video on demand

o   Set-Top Boxes

o   Dish antennas

o   Fed horns and LNB's

o   Head end station compressing of:

-   Basic unit with slots

-   Channel processing modules

-   Integrated programmable input distribution panel (splitter)

-   Microprocessor based control unit

-   Power supply unit

-   19" steel rack cabinet to accommodate all main equipment

-   Coaxial cables network

-   Splitters and tap-off boxes

-   TV/FM sockets

-   Line / distribution amplifiers